To Next PageTo Next Page
Need help?Do you have a question about the BBV TX1500 and is the answer not in the manual?
General| Video Inputs | 16 |
|---|---|
| Video Output | 16 |
| Input Ports | 16 x HDMI |
| Output Ports | 16 x HDMI |
| Power Supply | 100-240VAC, 50/60Hz |
| Signal Type | HDMI |
| Control Interface | RS232 |
Explains the wiring of B-BUS for keyboards and alarm cards using RJ45 connectors and breakout boxes.
Illustrates the daisy-chained wiring configuration for RS485 telemetry receivers to the Tx1500.
Details the front panel view, internal components, and SW1 address switch settings for video input cards.
Explains diagnostic LEDs, SW1/SW2 functions for normal operation and factory reset procedures.
Describes the alarm card's front panel, internal view, SW1 address settings, and input circuitry.
Illustrates wiring and switch settings for Video Input and Monitor Output cards in a 96-camera system.
Details how to access the Tx1500 system menu, including PIN entry and main menu navigation.
Defines key system parameters like camera, monitor, alarm numbers, and keyboard configuration.
Explains how to control which monitors each keyboard can access and control via access tables.
Describes programming alarm actions, beep times, stacking, and relay activation for alarms.
Details how to set up camera sequences for individual monitor outputs, including dwell times.
Explains setting camera telemetry types and assigning monitor/keyboard access for each camera.
Covers changing the system PIN number and the process for initializing the system to default settings.
Details system parameters like menu/program timeouts, lockout delays, display line, and relay actions.
Outlines additional settings for bump cameras, return to patrol, and startup monitor actions.
Describes programming specific features for BBV up-the-coax receivers like presets, iris level, and patrols.
Explains how to select and display cameras using the keyboard and monitor interface.
Details how to select and control monitors using the keyboard interface within the user guide.
Describes camera movement using the joystick, lens keys, and auxiliary output functions.
Explains DIP switch configurations for keyboard address, termination, and program key enable.
Outlines the steps for calibrating the joystick to ensure accurate pan, tilt, and zoom control.
Details the settings for SW1, SW2, SW3, and SW4 on the BBUS interface for various configurations.
Describes SW3 and SW4 settings for connecting a TX1500 keyboard remotely via BBUS interface.
