To Next PageTo Next Page
Need help?Do you have a question about the BBV TX1500 system and is the answer not in the manual?
All normal safety precautions must be observed as laid down by British Standards and Health and Safety legislation.
Shows daisy-chained and star configurations for RS485 telemetry receivers.
Procedure to reset the TX1500 to factory default settings by manipulating switches.
Lists commands for checking firmware, telemetry, switches, and connected devices.
Programs which monitors each keyboard can control, using Y/N settings.
Configures input action, beep time, alarm stack, and relay 1 time.
Sets telemetry type, monitor access, and keyboard control for each camera.
Explains the different telemetry protocols and their compatibility.
Details wiring for RS422 simplex telemetry using RJ45 connectors and breakout boxes.
Details telemetry protocols, preset support, and specific function mappings.
Procedure to change the default system password and make a note of the new PIN.
Features for uploading system parameters to PC for backup and downloading for restore.
Procedure to delete all matrix programming and restore default settings with caution.
Step-by-step guide to recalibrating the joystick for accurate control.
Lists functions like SELECT MONITOR, SELECT CAMERA, PAN/TILT, PRESET, and PATROL with their strings.
General