MODEL 710
The model 710 is the smallest tractor of the BCS pro-
duct line. It has 3 forward speeds and 2 reverse, without
differential.
The drive is controlled using only one control rod loca-
ted on the left side of the handlebar.
On these models there is also a PTO / reverse lockout
device that prevents shifting into reverse with the tiller
engaged.
The lockout disengages automatically when a front at-
tachment is installed on the unit.
When a front attachment is installed on the unit, what
was the reverse gear in the tilling mode is now the for-
ward gear.
When a front mount attachment is on the unit, the
third gear (transport gear) is blocked out.
18
2
GEAR SHIFT ROD
LEVER LATCH
CLUTCH LEVER
RED ENGINE STOP
LEVER
THROTTLE LEVER
P.T.O. CONTROL ROD
CONTROL COLUMN
INDEXING LEVER
ENGINE
CABLE GUIDES
To Next Page
Loading...
