Chapter 3: Instrument setup 31
Setting the display To set up the instrument display:
1. Press the Settings tab.
2. Press a button to change one of the following settings:
• Date (year/month/day)
•Time
• Display brightness
• Volume, from high to mute
• Hb units for the total hemoglobin result. Select grams per
deciliter (g/dL) or grams per liter (g/L).
• (Optional) Lab. Press Backspace to delete the default
setting. Enter a lab name from 0–15 characters.
• (Optional) Operator-1, Operator-2, or Operator-3. Press
Backspace to delete the default setting. Enter an operator
name from 0–15 characters. If this field is left blank, the
setting reverts to the default setting.
• Quality Control. Opens the Process Control Settings
screen. See Entering process control information (page 45).
3. Press Accept to accept a setting.
To Next Page
Loading...
