Chapter 4: Instrument use 35
Procedure To set the on-board timer:
1. Press the On-board Timer tab.
2. Press the timer that corresponds to the numbered slot
containing the cartridge on the BD FACSPresto work station.
The timer starts at 18 minutes and shows the minutes and
seconds remaining until incubation is complete. It turns green
when complete.
If another screen is open when the timer completes, the icon on
the On-board Timer tab turns green and the instrument beeps.
3. (Optional) Press a green timer to reset it.
More information • BD FACSPresto work station (page 17)
To Next Page
Loading...
