1705Router Web Configuration Manual
It shows WAN port name and type(such as PPPoE, Static IP, dynamic IP) of router.
Click the button of port name to enter material configuration page layout.
There are three configuration types for WAN port:
Ethernet(static IP)
If you use the IP address which is provided by ISP, you should choose this
method to configure router
IP address, subnet mask: fill in the IP address and subnet mask that are provided
by ISP.
MTU(Maximum Transmission Unit): the default is 1500. It isn’t amended usually.
Ethernet(Dynamic IP)
If you obtain IP address automatically from ISP, you should choose this method.
And you needn’t configure any parameter.
ADSL
（
PPPoE
）
- 9 -
To Next Page
Loading...