1705Router Web Configuration Manual
Default Route: IP Addr
——
fill in the IP address of default route.
TPx
——
select a port of default route.
Metric: select the metric of reaching default route. The default value is 1. Usually
it is used to be the default value.
1.5.6 Static Route
It is used to configure the static route.
Click “Add Route” to add a static route.
Dst. IP Addr., Subnet Mask: fill in the destination IP address and subnet mask.
Gateway/Interface: fill in the next skip address or port if reached the destination IP
address.
- 19 -
To Next Page
Loading...