BEA SA - LIEGE Science Park - Allée des Noisetiers 5 - B-4031 Angleur - T +32 4 3616565 - F +32 4 3612858 - info@bea.be - www.bea.be
8/8
The colour version of this user's guide and other technical documentation are available on our website
(www.bea.be) or can be requested by phone (+32 4 361 65 65) or mail (info@bea.be).
Supply voltage:
Mains frequency:
Power consumption:
Output:
Max. Voltage:
Max. Current:
Max. switching power:
Installation height:
Temperature range:
Protection degree:
Humidity:
Norm conformity:
Dimensions:
Housing material:
Front face material:
Housing colour:
Front face colour:
Cable length:
*depending on size and nature of target
**mounting height: 5m
Specifications are subject to changes without prior notice.
Technology:
Radiated frequency/wavelength:
Radiated power density
Detection type:
Detection field:
Output hold time:
Reaction time:
Min. target speed:
Tilt angle:
LED-signal:
12 - 24V AC +/- 10%
12 - 24V DC +10% / - 3%
50 - 60 Hz
< 3.5W / VA
2 relays with switch-over contact (voltage free)
42V AC / DC
1A (resistive)
30W (DC) / 48VA (AC)
2.5m - 6m*
-30°C to +60°C
IP65
0-95% non-condensing
Electromagnetic compatibility (EMC):
ABS
polycarbonate
black
smoked violet
10m
2004/108/EEC, R&TTE: 1999/5/EC
127mm (D) x 102mm (W) x 96mm (H)
microwave
24.150 GHz
2
< 5mW/cm
motion
4m x 5m**
0.5s - 9s (adjustable)
100ms
5cm/s (in sensor axis)
-8° to 22° (relative to sensor front face)
green
infrared
875nm
2
< 250mW/m
motion & presence
3m x 3m**
0.5s
250ms
5cm/s to activate a detection
15°- 45°
red
EU declaration of conformity
BEA hereby declares that the product CONDOR is in conformity with the basic
requirements and the other relevant provisions of the standards 1999/5/EC and
2004/108/EEC.
The complete declaration of conformity is available on our website: www.bea.be
TECHNICAL SPECIFICATIONS
42.0472 - V3 / 01.09
To Previous Page
Loading...
