75.5957.02 EAGLE FAMILY 20181130 Page 1 of 4
1
2
5
3
4
EAGLE & EAGLE HM
DESCRIPTION
Unidirectional activation sensor for automatic,
pedestrian doors and high-mount doors
ENGLISH
1. main connector
2. wide zone antenna (Eagle only)
3. narrow zone antenna (optional for Eagle, default for Eagle HM)
4. push buttons
5. cover
TECHNICAL SPECIFICATIONS
Technology: microwave and microprocessor
Transmitter frequency: 24.150 GHz
Transmitter radiated power: < 20 dBm EIRP
Transmitter power density: < 5 mW/cm²
Detection mode: motion
Min. detection speed: 2 in/s
Supply voltage: 12 – 24 VAC ±10%; 12 – 24 VDC +30% / -10%
Mains frequency: 50 – 60 Hz
Max power consumption: < 2 W
Output:
max. contact voltage:
max. contact current:
max. switching power:
relay (free of potential changeover contact)
42V AC/DC
1A (resistive)
30W (DC) / 60VA (AC)
Mounting height: Eagle: 6’ – 13’
Eagle HM: 10’ − 16’6"
Degree of protection: IP54
Temperature range: -4 – 131 °F
Dimensions: 4.7" (L) × 3.1" (H) × 2.0" (W)
Tilt angles: 0 – 90° vertical; -30 – 30° lateral
Material: ABS
Weight: 7.6 oz
Cable length: Eagle: 8’
Eagle HM: 30’
Norm conformity: R&TTE 1999/5/EC, LVD 2006/95/EC, RoHS 2 2011/65/EU
Specifications are subject to change without prior notice.
All values measured in specific conditions.
The image shown here is a standard Eagle.
Antennae differ between the standard and high-mount versions of the Eagle.
Visit website for
available languages of
this document.
To Next Page
Need help?
General
