FUNCTION MENU CONT...
BEAT TYPE
1. Repeatedly press the [FUNCTION] button to select the beat menu.
The LCD displays “Beat”.
Use the [+ ]/ [-] buttons to change the beat type.
2. Pressing [+] and [-] buttons at the same time will reset the beat
type to default “004”.
TOUCH
1. Repeatedly press the [FUNCTION] button to select the touch
menu. The LCD displays “Touch”.
Use the [+ ]/ [-] buttons to change the touch level.
2. Pressing [+] and [-] buttons at the same time will reset the touch
level to default “002”.
MODULATION
Repeatedly press the [FUNCTION] button to select the modulation
menu. The LCD displays “Modul”.
Use the [+] / [-] buttons to switch modulation on or o.
Note:
Modulation is not available for percussive sounds.
DSP
Repeatedly press the [FUNCTION] button to select the DSP menu.
The LCD displays “Dsp”.
Use the [+] / [-] buttons to switch DSP on or o.
REVERB TYPE
1. Repeatedly press the [FUNCTION] button to select the reverb
type menu. The LCD displays “Rev Type”.
Use the [+]/ [-] button to change the type value.
2. Pressing [+] and [-] buttons at the same time will reset the reverb
type to default “004”.
REVERB LEVEL
1. Repeatedly press the [FUNCTION] button to select the reverb
level menu. The LCD displays “Rev Lev”.
Use the [+]/ [-] button to adjust the level over the range of 0-32.
2. Pressing [+] and [-] buttons at the same time will reset the reverb
level to default.
AK160
15
To Next Page
Loading...
