Beckhoff BC3150 - Page 11

Product overview
BC3150 11Version: 2.1.0
Technical data BC3150
Digital peripheral signals 2040 inputs/outputs
Analog peripheral signals 1024 inputs/outputs
Configuration possibility via TwinCAT or the controller
Maximum fieldbus byte number depending on fieldbus
Maximum number of bytes - PLC 2048bytes of input data, 2048bytes of output data
Bus connection D-sub, 9-pin
Power supply (Us) 24V
DC
(-15% /+20%) Use a 4A fuse or an NEC Class2 power supply to
meet the UL requirements!
Input current (Us) 60mA + (total K-bus current)/4
Starting current approx. 2.5 x continuous current
K-bus current (5V) maximum 1000mA
Power contact voltage (Up) maximum 24V
DC
Power contact current load (Up) maximum 10A
Recomm. back-up fuse (Up) ≤10A
Dielectric strength 500V (power contact/supply voltage/Ethernet/fieldbus)
Weight approx. 100g
Dimensions (W x H x D) approx. 44mm x 100mm x 68mm
Permissible ambient temperature
range during operation
-25°C ... +60°C
Permissible ambient temperature
range during storage
-40°C ... +85°C
Relative humidity 95% no condensation
Vibration/ shock resistance conforms to EN60068-2-6/ EN60068-2-27
EMC immunity/ emission conforms to EN61000-6-2/ EN61000-6-4
Installation position variable
Protection class IP20
Approvals
CE, cULus, ATEX [}25]