Commissioning
EL500x 119Version: 3.6
Fig.140: CoE settings and EL500x process data in TwinCAT 2.11
• Red: setting range for objects 0x4060 [}124]ff.
• Blue: setting range for objects 0x8010 [}127] with subindices.
• Green: OnlineData means that currently the data from the EL terminal are displayed, in contrast to
offline data from the XML description/ESI file if the terminal is physically not connected, for example.
The startup list should contain all permanent modifications for the CoE in order to ensure that the
settings are re-loaded into the EL terminal with each TwinCAT restart. Otherwise the settings would be
lost if the device is replaced.
SSI settings
• Index 0x8000:01 [}126], disable frame error
If the bit is set to TRUE, data errors such as invalid telegram size are no longer shown in the Data error
process record.
To Next Page
Loading...