Beckhoff KS6031 - Page 30

KS2000 Configuration Software
KL6031/KS6031, KL6041/KS604130 Version: 2.1.0
Communication Parameters (R34)
• Half duplex (R34.0 [}39]),
(default: deactivated)
• Alternative output format (R34.1 [}39]),
(default: deactivated)
• Status byte one cycle later (R34.2 [}39]),
(default: deactivated)
• XON/XOFF supported sending data (R34.3 [}39]),
(default: deactivated)
• XON/XOFF supported receiving data (R34.4 [}39]),
(default: deactivated)
• Point to point connection (R34.5 [}39]),
(default: deactivated)
• Send FIFO data continuously (R34.6 [}39]),
(default: deactivated)
• Extended process data interface (R34.7 [}39]),
(set automatically)
• Transfer rate optimization (R34.8 [}39]),
(default: activated)