Mechanical Installation – Part 2: Mover
Version: 1.0 ───
69XPlanar
WARNING
Keep the workplace free of metallic and magnetic materials
Make sure that your workplace is free of metallic and magnetic
materials before positioning the mover. Only remove the mover
from the transport securing device if absolutely necessary for as-
sembly work on the tool. The transport securing device weakens
the magnetic field and protects electrical components from mag-
netic influences.
If movers are attracted by metallic and magnetic parts, serious in-
juries to the fingers from crushing and in the eyes from splinters
can result.
► Carry a single mover in its transport securing device directly to
the workplace
► Attach the tool to the mover
► Carry a single mover in its transport securing device directly to
the system
WARNING
Label the tool with a safety pictograms
If the tool on the mover obscures the safety pictograms in your
application, you must affix the safety pictograms to your tool so
that they are visible.
If the safety pictograms are not visible, other persons may not be
aware of possible dangers and may be seriously injured during
use.
To Next Page
Loading...
Need help?
General
