67 X32 DIGITAL MIXER Preliminary User Manual
7.13. 6 Scenes Screen: MIDI Tab
This MIDI tab of the scenes screen allows the console to associate dierent scenes
with outgoing MIDI messages, allowing the console’s scene changes to control by
external MIDI equipment.
For instance, the user could congure the console to issue a MIDI program
change message as each new scene is recalled, with the outgoing MIDI message
triggering a new scene of a MIDI-equipped lighting controller.
Note - Scenes can be recalled via MIDI using simple Program Change 1-100
commands, provided that MIDI Scene Recall is generally enabled on the
Setup/Remote page.
To adjust the various settings on the MIDI tab, perform the following steps:
1. Rotate the 1st encoder to scroll through the cue list.
2. Rotate the 3rd encoder to select program change, control change, or note.
3. Adjust encoders 3-6 to select the channel, number, and (if applicable) the
value or velocity.
To Next Page
Loading...
