BEIER-Electronic USM-RC-3 - Using Software USM-RC-3 Sound-Teacher

GB Sound module USM-RC-3
11.10.2021 BEIER-Electronic 63
Using software „USM-RC-3 Sound-Teacher“
Menue
File
Create new project
Creates a new project
Open project
Opens an existing project
Save project
Saves the current project
Save project as
Saves a copy of the current project with a
new name
Print function
assignment of the
project
Prints an overview of the function
assignments of all inputs and outputs
Upload project data via
datacable
Uploads the complete project data via
datacable to the sound module
Check automatically for
updates
On every start of the Sound-Teacher, it will
be checked if a new version is available
Check now manually for
updates
Checks if a new version is available
Download sounds from
the internet
Downloads new sounds from the internet
Open Sound-Center
Opens the BEIER-Electronic Sound-
Center, a sound data base from our
cutomers
SD card
Diagnosis via SD card
Shows saved diagnostic data of the USM-
RC-3 stored on the SD card
Formating SD card
Formates (erases) the SD card
D: to Z:
Choses the SD card
Data
cable
Transfer speed
Change of data transmission speed
Upload project data with
data cable
Transfer of project data to SD card by data
cable
Diagnosis via datacable
Shows live diagnostic data of the USM-
RC-3 with the datacable
Control USM-RC-3
functions with data
cable
Functions can be triggered with the data
cyble without radio
Language
German
Switches to German language
English
Switches to English language
French
Switches to French language
Help
Operating manual
Opens this manual (PDF)
Forum: USM-RC-3
Support
Opens the BEIER-Electronic forum at:
USM-RC-3
Forum: FAQ
Opens the BEIER-Electronic Forum at:
FAQ
Facebook
Opens the Facebook page from BEIER-
Electronic
Sound-Simulation
You can check e. g. the drive sound with
the sound simulation without uploading
data into the sound module
Info
Shows informations about the software