GB Sound module USM-RC-3
96 BEIER-Electronic 11.10.2021
Configuration – Light module – Light module motor
To control the motor output the light modules LM-IR-16-4 and
LM-BT-16-4 there are 2 options:
1. Control the motor output using the "up" / "down" functions: Here the motor can
be controlled using the two functions "LM: Motor up" and "LM: Motor down". If
neither of the two functions is active, the motor stops. The speed of the motor
can be set to a fixed value between 0 and 100%.
2. Control the motor output via a proportional channel: The motor output can
also be controlled via a proportional channel. The speed of the motor can be
continuously controlled with the selected channel. The motor output behaves
like a speed controller here. The speed can also be limited. Values from
-100% to +100% are possible here. A negative value reverses the direction of
rotation of the motor.
To Next Page
Loading...