Beko BEHPH 090 - How to use basic functions; Basic operation; AUTO Mode; COOL Mode

11 / 56 EN
Remote Control / User Manual
5 How to use basic functions
5.1 Basic operation
A
ATTENTION! Before operation,
please ensure the unit is plugged
in and power is available.
1
3
2
Self
Clean+
Mode Sleep
TimerSET
OK
Swing
LEDTurbo
5.2 AUTO Mode
In AUTO mode, the unit will automatically select
the COOL, FAN, or HEAT operation function based
on the set temperature.
1. Press the MODE button to select AUTO.
2. Set your desired temperature using the TEMP
or TEMP button.
3. Press the ON/OFF button to start the unit.
C
FAN SPEED can’t be set in AUTO
mode.
1
3
2
4
Mode Sleep
TimerSET
OK
Swing
LEDTurbo
Self
Clean+
5.3 COOL Mode
1. Press the MODE button to select COOL mode.
2. Set your desired temperature using the TEMP
or TEMP button.
3. Press FAN button to select the fan speed:
AUTO, LOW, MED or HIGH.
4. Press the ON/OFF button to start the unit.
The operating temperature range for units is
17-30°C (62-86°F)/20-28°C.
You can increase or decrease the set temperature
in 1°C (1°F) increments.