7 / 172 EN
Split Type Air Conditioner / User Manual
Electrical warnings
•
Only use the specified power
cord. If the power cord is
damaged, it must be replaced
by the manufacturer, its service
agent or similarly qualified
persons in order to avoid a
hazard.
•
Keep power plug clean.
Remove any dust or grime that
accumulates on or around the
plug. Dirty plugs can cause fire
or electric shock.
•
Do not pull power cord to
unplug unit. Hold the plug
firmly and pull it from the
outlet. Pulling directly on the
cord can damage it, which can
lead to fire or electric shock.
•
Do not modify the length of
the power supply cord or use
an extension cord to power the
unit.
•
Do not share the electrical
outlet with other appliances.
Improper or insufficient power
supply can cause fire or
electrical shock.
•
The product must be properly
grounded at the time of
installation, or electrical shock
may occur.
•
For all electrical work, follow
all local and national wiring
standards, regulations, and the
Installation Manual. Connect
cables tightly, and clamp them
securely to prevent external
forces from damaging the
terminal. Improper electrical
connections can overheat and
cause fire, and may also cause
shock. All electrical connections
must be made according to the
Electrical connection diagram
located on the panels of the
indoor and outdoor units.
•
All wiring must be properly
arranged to ensure that the
control board cover can close
properly. If the control board
cover is not closed properly,
it can lead to corrosion and
cause the connection points on
the terminal to heat up, catch
fire, or cause electrical shock.
1 Safety Precautions
To Next Page
Loading...
