VAV – Module NMV-D2M
N-A Applications
N-A 1 VAV-Compact NMV-D2M
The PC-Tool Module NMV-D2M has been designed specifically for the
VAV-Compact NMV-D2M and its use in connection with CAV and VAV air
boxes.
N-A1.1 Customised versions
Belimo VAV-Compact controllers are control devices that have been
manufactured for specific customers and are produced individually for
various air box manufacturers (OEMs). Therefore, each version is an op-
timum match for the components used by particular manufacturers, such
as measuring transducers, damper spindles and mounting systems.
Some customised versions have different operating step control systems
than the standard NMV-D2M. The technical documentation provided by
the manufacturers of the air boxes should be given close attention.
N-A 1.2 Support for …
… VAV-Compact NMV-D2 / NMV-24V / NMV-24D
These devices are not sold any more and are not supported by PC-Tool
V2.
... VAV-Universal VRD2 / VRD2-L / VRP / VRP-STP
are not supported by PC-Tool V2.
... VAV ...24-MFT2 actuators
These actuator types need the MFT-PC Module of PC-Tool.
Therefore, please change over to the appropriate module.
... VAV ...24 V actuators
These types are pure VAV actuators from the VAV-Universal range and
are not supported by PC-Tool V2.
Designation of customised versions
When planning to change old Belimo VAV controllers
such as VR1, VR2, NMV24-D and NMV24-V first get in
touch with your local Belimo agent or representative !
To Next Page
Loading...
Need help?
General
