VAV – Module NMV-D2M
N-A3 Module NMV-D2M: General
N-A3.1 Purpose
Module NMV-D2M is used specifically for VAV air boxes to operate and
assign parameters to the Belimo VAV-Compact NMV-D2M controller. The
functions are shared between the two ‘Service’ and ‘Expert’ registers de-
pending on the particular application.
In addition to these two registers the module also offers users a variety of
basic functions. This chapter describes each of those functions in detail.
N-A3.2 Description of the elements
N-A3.2.1 Operator interface
Menu bar
Toolbar
Actuator ident ifier
Active communicat ion link
Status line
Buttons
Data comparisonRegister
To Next Page
Loading...
