42
G+ MIMO Wireless Modem Router
SECTIONSTable of Contents 1 2 3 4 5 7 8 9 106
USING THE WEB-BASED ADVANCED USER INTERFACE
Changing the Wireless Network Name (SSID)
To identify your wireless network, a name called the SSID is used� The
SSID is your network name� The default network name of the Router is
“Belkin_G+MIMO_” followed by six digits that are unique to your Router�
Your network name will look something like “Belkin_G+MIMO_123456”�
You can change this to anything you choose, or you can leave it
unchanged� Keep in mind, if you decide to change your wireless network
name, and there are other wireless networks operating in your area, your
network name needs to be different from other wireless networks that
may be operating in your area� To change the SSID, type in the SSID
that you want to use in the SSID field (1) and click “Apply Changes”
(2)� The change is immediate� If you make a change to the SSID, your
wireless-equipped computers may also need to be reconfigured to
connect to your new network name� Refer to the documentation of your
wireless network adapter for information on making this change�
Note: Please periodically check for new Router firmware updates
from the “Utilities > Firmware update” page� Newer firmware can fix
problems, add wireless features, and/or improve wireless performance
(see page 64)�
(1)
(2)
To Next Page
Loading...
Need help?
General
