49
G+ MIMO Wireless Modem Router
SECTIONSTable of Contents 1 2 3 4 5 7 8 9 106
USING THE WEB-BASED ADVANCED USER INTERFACE
Setting WEP Encryption
Note to Mac users: The “Passphrase” option will not operate with
Apple
®
AirPort
®
� To configure encryption for your Mac computer, set the
encryption using the manual method described in the next section�
1. Select “128-bit WEP” or “64-bit WEP” from the drop-down menu�
2. After selecting your WEP encryption mode, you can enter you WEP
key manually by typing in the hex WEP key manually, or you can
type a passphrase in the “PassPhrase” field and click “Generate”
to create a WEP key from the passphrase� Click “Apply Changes”
to finish� You must now set all of your clients to match these
settings�
3. Encryption in the Router is now set� Each of your computers on
your wireless network will now need to be configured with the
same passphrase� Refer to the documentation of your wireless
network adapter for information on making this change�
To Next Page
Loading...
