41
G+ MIMO Wireless Modem Router
SECTIONSTable of Contents 1 2 3 4 5 7 8 9 106
USING THE WEB-BASED ADVANCED USER INTERFACE
Viewing the DHCP Client List Page
You can view a list of the computers (known as clients), which are
connected to your network� You are able to view the IP address (1) of the
computer, the host name (2) (if the computer has been assigned one),
and the MAC address (3) of the computer’s network interface card (NIC)�
Pressing the “Refresh” (4) button will update the list� If there have been
any changes, the list will be updated�
Configuring the Wireless Network Settings
The “Wireless” tab lets you make changes to the wireless network
settings� From this tab you can make changes to the wireless
network name or Service Set Identifier (SSID), operating channel,
encryption security settings, and configure the Router to be used as
an access point�
(1) (2) (3)
(4)
To Next Page
Loading...
Need help?
General
