51
G+ MIMO Wireless Modem Router
SECTIONSTable of Contents 1 2 3 4 5 7 8 9 106
USING THE WEB-BASED ADVANCED USER INTERFACE
Setting up a Deny Access List
The “Deny Access” list lets you specify computers that you DO NOT
want to access the network� Any computer in the list will not be allowed
access to the wireless network� All others will�
1. Select the “Deny” radio button (1) to begin setting up a list of
computers to be denied access to the wireless network�
2. Next, in the “MAC Address” field that is blank (2), type in the MAC
address of the wireless computer you want to deny access to the
wireless network, then click “<<Add” (3)�
3. Continue to do this until all of the computers you want to deny
access to have been entered�
4. Click “Apply Changes” (4) to finish�
Setting up an Allow Access List
1. Select the “Allow” radio button (1) to begin setting up a list of
computers allowed to connect to the wireless network�
2. Next, in the “MAC Address” field that is blank (2), type in the MAC
address of the wireless computer you want to be able to access
the wireless network, then click “<<Add” (3)�
3. Continue to do this until all of the computers you want to add have
been entered�
4. Click “Apply Changes” (4) to finish�
(1) (2) (3) (4)
(1)
(2)
(3)
(4)
To Next Page
Loading...
