Bell System CS106 - Programming a Lock Delay Time (Function 96)

CS106/BL106 Combined Door Entry and Coded Access
23
Programming a Lock Delay Time (Function 96)
This function causes a delay (0-99 seconds) to be introduced between the
triggering of the lock release and its operation. Typically, this facility is used
when the keypad is located some distance from the entrance.
Procedure
 Enter the current Security
key (default 1212).
 Type :
96 +
++
+ <0-99> #
 Both LEDs flash once
 Exit program mode by
pressing ++
++++
++
Factory Setting = 0 seconds
Example
96 +
++
+ 3 #
(3 second delay)