CS106/BL106 Combined Door Entry and Coded Access
24
Programming the Factory Settings (Function 99)
In the event of any problems, always return to Factory settings.
1 Program Code 1 1 2 3 4 5
2 Program Code 2 6 7 8 9 0
3 - 10 Program Codes 3 to 10 Disabled
51 Code 1 Action Number 1 (Operate always)
52 Code 2 Action Number 2 (Operate when Time closed)
53 - 60 Code 3 to 10 Action Numbers 0 (Disabled)
91 Security key 1 2 1 2
95 Lock Duration 3 seconds
96 Lock Delay 0 (Disabled)
Enter the Security key.
Type : 99
+
++
+
#
Both LEDs flash once
Exit program mode by
pressing
++
++++
++
If you have forgotten the
Security key see ‘Programming
the Factory Defaults Using the
Test Button’ page 32
To Next Page
Loading...