CS106/BL106 Combined Door Entry and Coded Access
33
Specification for the C106 Controller
Lock
Output Voltage: Same as Input Voltage
Load (maximum): 0.5A (load inductive or resistive)
Note : Inductive loads such as Maglocks must have suitable transient voltage
suppression fitted, e.g. a diode or MOV
Power (C + & H -)
Input Voltage: 12V to 14V
Current (maximum): 60mA
Dimensions
C106 Keypad: 90mm x 62mm x 33mm
Panel Cut-out: 87.75mm x 59.7mm
Panel Thickness 2mm or 3mm
To Next Page
Loading...