Oven Timer Operation
15
TO SET TIME OF DAY
Step 1 Make sure the oven control is turned off.
Step 2 Check the electricity supply to the cooker is
turned on.
Step 3 When switched on the display will show 0.00
and AUTO symbol will be flashing
intermittently.
Step 4 Press & hold in both the “ ” Minute Minder
& “ ” Cook Period button together.
Step 5 With the “ ” Minute Minder & “ ” Cook
Period buttons still held in, press either the
“+” or “–” buttons to set the correct time of day.
Step 6 Release all the buttons simultaneously.
THE TIME OF DAY IS NOW SET.
To change the time of day repeat Steps 4,5 & 6 above.
Note: You cannot adjust the time of day if the timer has
been set for an Auto Cooking Programme.
Step 4
Press and release the “ ” button the display will read
0.00 with the cookpot lit.
Within 2 seconds press and hold the “+” button until the
required cooking period is set.
(Adjustment can be made by pressing the “–” button).
The timer display will revert to the time of day with the
Auto symbol and Cookpot lit.
At the end of the cooking period the Auto symbol
will Flash and an intermittent bleeping sound will be
heard.
– This will continue for approximately 2 minutes unless
the timer is reset within this period (See Step 6).
To Set Timer To Switch OFF Automatically
This allows you to cook immediately for a chosen period before the oven switches Off
Automatically
Step 1 Ensure the time of day is set correctly.
Step 2 Place food onto the correct shelf position in the oven.
Step 3 Turn the oven control to the required temperature and the selector switch to the
required function (Oven should now be operating).
The oven will now no longer operate until the timer has been reset.
(See Steps 5 & 6 on next page)
To Next Page
Loading...
