Belling 487 - Setting Timer for Automatic Switch-Off; Setting Timer for Automatic Start and Stop

Oven Timer Operation
16
To Set Timer To Switch OFF Automatically (cont.)
Step 5
Turn off the oven control and selector switch.
Step 6
Press the “ ” button to cancel the bleeping.
(If 2 minutes has not elapsed.)
Press “ ” button again to return to Manual
Operation.
Step 3
Press and release the “ ” button the display will
read 0.00 with the cookpot lit.
Within 2 seconds press and hold the “+” button
until the required cooking period is set.
(Adjustment can be made by pressing the “–”
button).
The timer display will revert to the time of day
with the Auto symbol and Cookpot lit.
Step 4
Press the release the “ ” button the display will
read the earliest possible end time with the
Cookpot and Auto symbol lit.
Within 2 seconds press and hold the “+” button to
set to the time you require the food to be ready,
with only the Auto symbol lit.
(Adjustment can be made by pressing the “–”
button).
1.20
13.23
A
U
T
O
16.20
A
U
T
O
14.23
A
U
T
O
To Set Timer To Switch ON and OFF Automatically
This allows you to cook at a specified time for a chosen period before the oven
switches Off Automatically.
Step 1 Ensure the time of day is set correctly.
Step 2 Place food onto the correct shelf position in the oven.
16.20
A
U
T
O
Step 5
Turn the oven control to the required temperature and the selector
to the required function.The oven will now switch on later in the day for
the cooking period required and will cut off automatically at the stop
time setting.At the end of the cooking period the Auto symbol will
flash and an intermittent bleeping sound will be heard.This will
continue for approximately 2 minutes unless the timer is reset within
the period. (See Step 7 on next page).
4866200116-01 487 MF D/O 19/04/2002 10:14 am Page 16