9Bend-Tech Dragon
Material Coolant System Assembly
02
Material Coolant System Assembly Manual
02
Material Coolant
System Assembly
2.1 Overview
The Dragon Material Coolant System enables the machine to achieve cleaner cuts with less
dross or slag. The material coolant system also reduces plasma dust and toxic gas during
the cutting process. While the material coolant system will help the Dragon machine achieve
steel.
2.1.1 Cooling System Assembly Tools
Before assembling the material coolant system, ensure the required tools are available. The
following tools are required to assemble the material coolant system:
Tools Needed
•
•
•
•
•
•
•
• Slotted or Flat blade
screwdriver
• Punch or small Phillips
screwdriver
• Utility knife
• Rubber mallet or plastic dead
blow hammer
• Large channel lock pliers
To Next Page
Loading...
Need help?
General
