Bender ISOMETER iso415R - Page 26

26 iso415R-x_D00401_00_M_XXEN / 04.2021
Modbus settings
Address
(dec)
Register name Data type Bytes Mode Value/Unit/Comment Factory
setting
Function 7: Reset
60000 Function selection Uint16 2 WO 7 → Selection of "Reset" function N/A
60001 Pattern value part 1 Uint16 2 WO 13623 → Safety pattern must be written
for the function to be executed
N/A
60002 Pattern value part 2 Uint16 2 WO 0 → Safety pattern must be written for the
function to be executed
N/A
60003 Type of reset Uint16 2 WO 1 → Reset of the alarm message when
fault memory is enabled
N/A