Need help?Do you have a question about the Bender ISOMETER isoRW425 and is the answer not in the manual?
General| Measurement Principle | Insulation monitoring device for unearthed AC and DC systems |
|---|---|
| Resolution | 1 kΩ |
| Test Voltage | > DC 30 V |
| Display | Multilingual plain text display |
| Operating Temperature | -10°C to +55°C |
| Power Supply | AC/DC 24 V to 265 V |
| Weight | Approx. 270 g |
| Automatic adaptation to the system leakage capacitance | Yes |
| Two separately adjustable response values | Yes |
| N/C or N/O operation selectable | Yes |
| Automatic device self test | Yes |
| Connection monitoring (L1-PE, N-PE) | Yes |
| Modbus RTU interface | Yes |
| History memory with real-time clock | Yes |
| Parameterisation via display, PC or Modbus | Yes |
| Measurement range | 0-10 MΩ |
To Next Page
