Bender RCMA423 - Display in Standard Mode

Operation and setting
21
RCMA423_D00063_03_M_XXEN/03.2021
5.4 Display in standard mode
By default, the currently measured residual current is displayed. The current
response values I1 (prewarning) and I2 (main alarm) can be displayed using
the Up and Down key. Press the Enter key to return to the measured value.
t
(timing
check)
t on 1 - Response delay K1
t on 2 - Response delay K2
T-Start-up delay
t off - Delay on release K1/K2
Set
(device con-
trol)
I 12 HI
Selectable parameters:
High, window function, low
off
Parameter setting via pass-
word
FAC - Restore factory settings
SYS - Function blocked
InF
-
Display hard / software ver-
sion
HiS
Clr -
History memory for the first
alarm value, erasable
In the standard mode, the currently set response values I1
and I2 can be displayed using the Up and Down keys.
Menu
Sub
Menu
Menu
item
Activati
on
Adjustable parameter
M
m
A
I
2
m
A
>
M
I
1
m
A
>