15
Mounting Requirements
Options in white boxes are considered good options.
Options in grey boxes are considered possible options.
Material Recommended Recommended Material
Number Commercial Reference* Material Thickness (mm) Thickness with Cover @ 80° (mm)
1 Polyloy B69L62 PA6 2.25 2.22
TUC1228/93
2 CYCOLAC XMA 2.36 2.32
TUC1137/94 3.53 3.48
3 B70GFE30 2.1 2.07
TUC308/92
4 Hostacom PPX678/2 2.38 2.34
TUC1617/89
5 NORYL PX1112 2.35 2.31
TUC648/86 3.53 3.48
6 Hostaform C9021 2.33 2.29
TUC2559/83 3.5 3.45
7 Hostalen GDPE7255 2.56 2.52
TUC310/92 3.84 3.78
8 Hostacom PPR1042 2.51 2.47
TUC2641/86 3.77 3.71
9 PP-Kienb 2.39 2.35
3.58 3.53
10 ABS-Kienb 2.32 2.28
11 PPN 1080 2.58 2.54
3.88 3.82
12 XENOY 2.35 2.31
POCAN KU (PBT+PC)
13 ASA 2.26
14 PC - 0.1% soot 2.33 2.29
15 TICONA Celanex 2003 2.15 2.12
GV1/20 (PBT 20% GF)
16 TICONA Celanex 2003 2.05 2.02
GV1/30 (PBT 30% GF)
17 GE Plastics NORYL 2.4 2.36
PPX630
(PPE + PP 30% GF)
18 GE Plastics NORYL 2.1 2.07
GTX830
(PPE + PA 30% GF)
19 Ryton PPS R4-240 Nat 2.1 2.07
PPS 40% GF
*Commercial references are from European suppliers for the automotive market.
To Next Page
Loading...
Need help?
General
