System Overview
| 25 |
© Honeywell International Inc. Do not copy without express permission of Honeywell.
KFC 230 AeroCruze Autopilot Pilot's Guide
89000019-001
Rev 2 May 2019
4 Level (LVL) Button
With the optional straight and level mode
functionality, the autopilot provides a way to
return the aircraft to straight and level trim
condition. Straight and level mode can be
engaged by pressing the LVL button. Once
engaged, both the autopilot and flight director
are activated.
When active, LVL mode is annunciated on the autopilot
touchscreen by a light blue armed indicator box, light blue text
and a light green border. When straight and level mode is available
but not active, .LVL is annunciated in dark blue text and dark blue
border. Press the LVL button once again to exit straight and level
mode.
CAUTION: The aircraft attitude must be within the straight
and level engagement envelope, therefore the
functionality will not recover from all possible
unusual attitudes.
NOTE: After straight and level recovery, the resulting aircraft
pitch axis is dependent on the power settings (e.g. at
low power settings the aircraft will descend and in high
power settings the aircraft will climb).
NOTE: It is the pilot’s responsibility to manage airspeed during
all unusual attitude recoveries.
5 Up/Down (UP/DN) Buttons
The UP/DN soft buttons are used to make adjustments to pitch,
indicated airspeed, vertical speed rate, and altitude adjustments.
See 8 Mode Buttons on page 27 for specific information.
REF:
To Next Page
Loading...
