EasyManuals Logo

BendPak XPR-9 Series User Manual

BendPak XPR-9 Series
92 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #57 background imageLoading...
Page #57 background image
XPR-9 Series Two-Post Lifts 57 P/N 5900371 — Rev. D2 — May 2023
Again, follow the instructions in Raising a Vehicle and Lowering a Vehicle to safely raise
and lower a Vehicle on the Lift, including engaging it on its Safety Locks.
10. If the Lift is working without shaking, moving erratically, or squeaking, there is no need to repeat
the procedure.
If the Lift is shaking, moving erratically, or squeaking, repeat the procedure one more time.
If you continue to have issues, refer to Troubleshooting for assistance.
11. When the Lift is on the ground and the Vehicle is on all four tires, move the four Lift Arms to their
full drive-through positions.
12. Drive the Vehicle out.
13. With no Vehicle on the Lift Arms, press and hold the Up button on the Power Unit.
The Lift Arms start rising.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the BendPak XPR-9 Series and is the answer not in the manual?

BendPak XPR-9 Series Specifications

General IconGeneral
BrandBendPak
ModelXPR-9 Series
CategoryLifting Systems
LanguageEnglish

Related product manuals