Benelli TNT300 - Left Handle

2
“ ” ( On ) position: The circuits are on
“ ” Position: turn left to the maximum, press the key to the position of “ ”. Take out the key. In this condition, the
vehicle has been locked. If you want to unlock the vehicle, insert the key and turn clockwise.
5
1
LEFT HANDLE
1. CLUTCH LEVER
When starting the engine or shifting, pull the clutch lever to cut oF driving on the rear wheels.
2. HIGH & LOW BEAM SWITCH
Turn the switch to " " position, the high beam of headlamp turn on and the indicator lamp on the meter would
also turn on; turn the switch to " " position, the low beam of headlamp turn on.
3. DIRECTION INDICATOR LAMP SWITCH
Turn the switch to " " position, the left direction signal lamp £ashes; turn the switch to " " position, the
right direction signal lamp £ashes. And the indicator lamps would turn on accordingly.
TNT300
16