Benelli TNT300 - Tire Maintenance and Pressure Checks; Valve Clearance Adjustment Recommendation; Tire Inflation and Tread Condition; Tire Pressure Specifications

Notice:
Adjustment of valve clearance will have direct in£uence on the performance of engine, thus requiring
strict accordance with the time interval required in "Maintenance Schedule". Adjustment should be done
with professional technicians corresponding tools. In order to keep the valve clearance in good condition,
we strongly recommend you to leave it up to consult to authorized dealers about this maintenance.
TIRE
In£aztion pressure and tire tread should be regularly checked. In order to ensure maximum safety and longer
service life, in£ation pressure requires more frequent routine check.
Tire Pressure
Insu£cient tire pressure will not only accelerate wearing, but also have bad impact on driving stability such as
making turning di£cult. However, too high pressure will reduce the contact area between tire and ground, thus
causing slipping or even getting out of control. Tire pressure should be kept in the standard range. Adjust the tire
Front Wheel
230kpa
Rear Wheel
250kpa
TNT300
44