Benelli TNT300 - Air Filter Maintenance and Bulb Replacement; Air Filter Cleaning and Oiling Procedure; Headlamp Bulb Replacement Procedure

MAINTENANCE OF AIR FILTER
Air £lter should be regularly maintained, especially when driving in areas full of dust and sand.
1. Dismount the seat, fuel tank and the side cover.
2. Remove the screw, open the cover of air £lter and take out the £lter element.
3. Immerse the £lter element in clean solution and take out after cleaning for complete drying.
4. Immerse the £lter element in clean engine oil again, after saturation, take out and squeeze oF excessive oil.
5. Install the components back in the reverse order of dismount.
Caution :
Those highly £ammable liquid like gasoline and organic solvent cannot be used for cleaning
the £lter element.
BULB REPLACEMENT
Replacing of Head Lamp Bulb
Take oF the cover, replace the old bulb with the same speci£cation one, and £nally set up in the reversed orders.
41
TNT300