Benelli TNT300 - Engine Oil Level Check and Change; Checking Engine Oil Level; Engine Oil and Filter Replacement

Be repaired by authorized dealers: with quali£ed tools and inspection materials provided by the owner; by
persons with mechanical repair certi£cation; required to be followed the maintenance manual for self-inspection.
Examination and repair are suggested to be taken by authorized dealers for the sake of safety, in cases of these
items
Notes:
1. Make more inspections for driving in dusty areas.
2. Repeat the shown regular inspection, if the odometer reading exceeds the £xed value.
3. Take more maintenance to keep good performance for frequent driving in heavy conditions as rugged roads.
OIL LEVEL & OIL CHANGE
Check the oil level before starting the engine.
Put the motorcycle on side stand. Pull the handle bar and let the bike stand
vertical to the £at ground. Check if the oil level is between the maximum
2
and minimum level. If not, £ll the quali£ed engine oil to the proper amount.
3
Oil Change & Oil Filter Replacing
1. Take down the oil £lter with the special tool and oil drain bolt before oil
draining.
2. Replace the oil £lter with a new one if needed.
31
TNT300