Benelli TNT300 - Spark Plug and Catalytic Converter Care; Spark Plug Inspection and Replacement

.6-0.7mm
3. Install the oil £lter with the special tool and oil drain bolt.
4. Fill the engine with quali£ed engine oil
5. Make the engine runs in idling for several minutes and turn oF.
6. Make sure the oil reaches the upper limit mark without any oil leakage.
SPARK PLUG
Clear away carbon deposit on the spark plug with small metal wire brush or spark plug cleaner during inspection
period noted in the maintenance schedule. Readjust the electrode gap of spark plug with feeler gauge and keep the
gap between 0.6 ~ 0.7mm.
Replace the sparking plug for each 6000km.
Type of Spark Plug: NGK CR8E
0 6-0.7mm
Do not Screw the spark plug too tight to avoid damaging the threads of cylinder cover.
Don't let the foreign objects fall into the engine through spark plug hole during
dismounting.
CATALYTIC CONVERTER
In order to meet the requirements of environmental emission, the mu£er of the motorcycle is equipped with
catalytic converter.
TNT300
32