Benelli TNT300 - Pre-Driving Inspection - Handlebar and Braking; Handlebar Stability Check; Braking System Functionality Check

For driving a new motorcycle in its £rst 1,000km way, the engine should not be over revved and all the gears shall
not be over 80% of red zone engine rpm; don't operate the throttle under a fully open position; change the gears
in time to keep the engine rpm in reasonable range. It is strongly suggested to use the motorcycle very carefully
during its running in period; also the rider has to be familiar to the performance.
Note : In the £rst 300km of break in, you should examine the cleanliness of the engine oil frequently. Check the
oil level of engine oil before driving.
INSPECTION BEFORE DRIVING
Please check on the following contents which are very important before driving,
Content
Comments
Handlebar
1) Stable
2) Turn smoothly
3) No sliding or loose
Braking
1 ) Right clearance of the lever and brake pedal
2 ) No sponge feeling
23
TNT300