Warning: The motorcycle must
be
equipped
with the
quali£ed fuse
for
a safe driving, any
other unquali£ed
speci£cations
of
fuses are
not
allowed
to
use, especially
the
electric wires which
would
result severe damages
to
other
parts, even £re
accidents.
Location
of
fuse: beside
the battery;
Fuse speci£cation: 40A
for
main power
fuse.
Burnt fuse is usually caused
by the
internal circuit
fault of the
motorcycle. Simply estimate
the
whole situation
of
the
motorcycle before changing
the
spare fuse and
if the
fuse
still burn
after changing, send
the
motorcycle
to the
maintenance service center
as soon as possible.
It
can
only be
driven after
the fault
is
resolved.
Notes:
Before changing
the
fuse, switch
the
key
to " " in
case
of
short
circuit;
*
Make sure
the
contact
point of
fuse is
not
broken
while
changing
the
fuse, which
would
result bad contact,
parts
damage, and even
£re.
No recon£guration: Do
not
recon£gure
the
motorcycle
or
change
the
places
of the
parts and accessories
at will,
which
would
have a strong impact
on the
stability and safety
of the
motorcycle, probably operation faults.
All the
recon£gurations
of the
electric system, emission
control
system, canister and any
other
systems
or
parts are
against
the driving
safety and
other
relative
tra£c
administration regulations. And all
the quality
problems
and
consequences resulted
by the
user's
recon£guration
or
changing
of the
parts
without
authorizations
would
be
taken
by the
user himself. The user shall obey
the
speci£c regulations and rules
of the tra£c administrative
department.
5
To Next Page
Loading...
