EasyManuals Logo

BenQ DC C50 User Manual

BenQ DC C50
46 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
BenQ DC 5530 Users Manual
Using the DC C50
10
English
3.1.4. Using the Self-timer
The [ ] self-timer button can select the capturing mode between!#OFF# (default) and
#Self timer (2 sec., 10 sec., 10+2 sec. or Interval)#.
[2 sec.] The camera automatically takes a picture after two seconds delay.
[10 sec.] The camera automatically takes a picture after ten seconds delay.
[10+2 sec.] The camera automatically takes a picture after ten seconds delay, and
takes again after two seconds.
In case of flash light capacitor is not charged up, the second take can be
done at two second after charged.
[Interval] The camera automatically takes a picture every preset time till media
full or battery empty.
To activate the self-timer by pressing the shutter button. After selecting this mode, self-timer
icon displays on L
L
CD monitor and then LED on the front panel blinks fast for the last 3
seconds. Using the self-timer allows you to get into the scene when taking group images.
Note
The camera has 1X to 3X optical zoom and 1X to 4.0X electrical zoom function.
Digital zoom function is terminated when user selects LCD off mode.
1.!Secure the camera to a tripod or place it on a stable surface.
3.!Set the mode dial to one of [ ], [ P], [ TV ], [ AV ],
[ M ], [ ], [ ], [ ] , [ ] and power on the camera.
3.!Press the [ ] button.
When you toggle the self-timer button, the following are
displayed in the accordingly order:
Off 10 sec 2 sec 10+2 sec Interval
4.!Compose the picture.
5.!Press the shutter button down halfway, then press it down fully.
The self-timer function is activated.The photograph is then taken after the preset time.
When the photographs are taken using the LCD monitor, the count down is displayed.
Note
After an image is taken using self-timer, the self-timer mode is turned off.
The self-timer is not possible in the continuous capture mode.
The self-timer is only available for 2 or 10 seconds delay at [ ] mode. The camera
automatically starts to recording after 2 or 10 seconds.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the BenQ DC C50 and is the answer not in the manual?

BenQ DC C50 Specifications

General IconGeneral
BrandBenQ
ModelDC C50
CategoryDigital Camera
LanguageEnglish

Related product manuals