BenQ DC 5530 User’s Manual
Using the DC C50
30
English
3.10.7.3. LCD Brightness
Adjust the brightness of the LCD monitor. This adjustment does not adjust the brightness of
the image to be recorded. The LCD monitorís adjustment range is withinñ5 to +5.
3.10.8. Erasing Images [ ]
The [ ] button provides to erase image file. While pressing [ ] button during monitoring
mode, the latest image data and erase menu appears on the LCD monitor.
1. Select the “LCD Bright” by using the or button
and press the SET button.
2. Use the or button to select the desired setting
and press the SET button.
LCD Bright.
0
1. Press the [ ] button.
• The Delete menu is displayed on the LCD monitor.
2. Use the or button to select the Delete sub-menu
(S
ingle/All/Select).
!Erasing Single Image
Single: Erase this image.
a. Select [Single] and press the SET button to
confirm the selection.
• "Delete This Picture@" sub-menu is displayed on
the LCD monitor.
b. Use the or button to select Execute/Cancel.
[Execute]: Erase this image.
[Cancel]: Cancel the deletion
C. Press the SET button to confirm the setting.
!Erasing All Images
All: Erase all images.
a. Select [All] and press the SET button to confirm the
selection.
• "Delete All Pictures@" sub-menu is displayed on
the LCD monitor.
b. Use the or button to select Execute/Cancel.
[Execute]: Erase all images.
[Cancel]: Cancel the deletion
C. Press the SET button to confirm the setting.
Set:Enter or :Select
Delete This Picture?
Cancel
Execute
Delete
To Next Page
Loading...
Need help?
General
