BenQ DC 5530 User’s Manual
Using the DC C50
26
English
LCD Monitor Display (Playback Mode)
The [ ] Display button can switch the display on the LCD monitor when playing
back photographed images. You can switch the display to show a list of detailed
information.
1. Set the mode dial to [ ] and power on the camera.
2. Rotate the C
ommand dial or press the or button to select the image.
3. Press the [ ] button.
• Each press of the [ ] button switches the display format as follows:
Standard Image only Detailed information
3.10.2. Voice Record
By pressing the shutter button during playing back the picture, voice may be recorded. When
pressing the shutter button down fully “VOICE RECORDING” is indicated on the LCD
monitor for 10 seconds. Pressing the shutter button down fully again “VOICE RECORD
END” is indicated.
3.10.3. Playing Back Movies
Playback movies that you have recorded. The movies made in FULL size are displayed on the
entire LCD monitor, and those made in HALF size are displayed in the center of the screen.
Press the SET button and then you will see playback of the selected movie begins.
Note
•
This function is not available for movie image playback.
Note
•
In the playback display mode, voice icon is displayed for the voice recorded picture.
• Voice record is also available at still image capture mode.
• Voice record only can be done once.