BenQ DC 5530 User’s Manual
Using the DC C50
20
English
Note
•
In [ ] , [ ], [ ], [ ] or [ ] mode, the ISO will be automatically set
between ISO 100 to ISO 400.
• In [TV], [AV] or [M] mode, during 100, the ISO will be fixed to ISO 100; during
200, the ISO will be fixed to ISO 200; during 400, the ISO will be fixed to ISO
400.
• In [ P ] mode, ISO setting has 100, 200, 400 and Auto . If Auto is selected, the
camera will automatically set the ISO value according to the ambient brightness.
Manual WB
You may select “Manual WB” by using the or
button at AE/AWB adjusting menu, and press the
SET button. LCD monitor shows the manual WB
menu. Compose the picture with white object
(e.g.white paper) inside the area indicated by blue
angle on the LCD monitor.
Select “Execute” by using the or button, then
press the SET button.
Note
•
This operation dose not care the current mode of white balance. After setting
manual WB automatically white balance mode can be set to manual.
To Next Page
Loading...
Need help?
General
