BenQ DC C62 User Manual

BenQ DC 5530 User’s Manual
Preparing Your DC C62 for Use6
E
EE En
nn ng
gg gl
ll li
ii is
ss sh
hh h
e
of Contents
2.1.3
2.1.32.1.3
2.1.3 Removing the Battery
Removing the BatteryRemoving the Battery
Removing the Battery
1. Slide the battery compartment cover on the bottom of the camera in the direction
indicated by the arrow and then swing it open.
2. Carefully tilt the camera until the batteries slide out.
• Take care to avoid dropping the batteries.
2.1.4
2.1.42.1.4
2.1.4 Low Battery Indicator
Low Battery IndicatorLow Battery Indicator
Low Battery Indicator
The following shows how the battery capacity indicator on the LCD monitor changes as battery
power is used. The indicator means that remaining battery power is low.
Note that you will not be able to record images while the battery indicator is .
Immediately replace or charge the batteries whenever either of these indicators appears.
2.2
2.22.2
2.2 Turning the Camera On and Off
Turning the Camera On and OffTurning the Camera On and Off
Turning the Camera On and Off
2.2.1
2.2.12.2.1
2.2.1 To turn on the camera
To tur n on t he came r aTo tur n on t he came r a
To tur n on t he came r a
Press the power button, [ ] (REC) button, or [ ] (PLAY) button. This will cause the
green operation lamp to light momentarily, and then power will turn on. The mode the camera
enters depends on which button you pressed to turn it on.
Charge Level
High Low
Indicator
To enter this mode at startup
Press this button to turn on the camera.
REC
Power button or [ ] (REC) button.
PLAY
[ ] (PLAY) button

BenQ DC C62 Specifications

General

Brand	BenQ
Model	DC C62
Category	Digital Camera
Language	English