BenQ DC 5530 User’s Manual
English
Using the DC E53+
10
3.1.2.5 Deleting Images
Use this function to delete one or all images/video clips stored in the internal memory or
memory card. Please note that the deleted images or video clips cannot be recovered.
Immediate Erase (Quick Delete Function)
The quick delete function enables you to delete an image immediately after capturing it.
1. Slide the mode switch to [ ] or [ ].
2. Press the button.
The last image and delete message appears on the screen.
3. Use the W /X buttons to select [YES], then press the OK
button.
If you wish to cancel the deletion, select [NO].
3.1.3 Capture Mode Menu Settings
3.1.3.1 Capture Mode Picture Menu
1. Slide the mode switch to [ ].
2. Press the button to access the menu, then use the W/X
buttons to select [PICTURE] menu.
3. Use the S/T/W/X buttons to select the desired item in
[PICTURE] menu, then press the OK button.
4. To exit from the menu, press the button.
Note
Protected images cannot be deleted.
Icon Item Functional Description
SIZE Sets the size of the image that will be captured.
QUALITY Sets the quality (compression rate) at which the image is captured.
SUPER FINE
FINE
NORMAL
SHARPNESS Sets the level of image sharpness.
HIGH
NORMAL
LOW
SELECT ITEM:
EXIT:
PICTURE
FUNCTION SETUP
Q
R
G
B
SELECT PAGE:
WB
WB
2560 x 1920
2048 x 1536
1280 x 960
640 x 480
TIFF IMAGE
5M
3M
M
1.2
M
0.3
Q
To Next Page
Loading...
Need help?
General
